+86 13965049124
categories
Aluminium pigment (aluminum silver paste) for latex
Aluminum has a very low density and is a soft metal. It is also the most active metal that reacts with water, acids, alkalis, and oxides. The state after the reaction is aluminum hydroxide, which will lose its luster. It will react violently with strong acids, alkalis, and oxides to produce strong hydrogen, which is easy to explode when exposed to open flames and static electricity.
The aluminum pigment for Benzoic balloons is an inorganic and organic double-wrapped product. Its nano-silver technology is better than traditional products, and the reasonable formula can achieve chrome-plating level brightness.
This product has good heat resistance, alkali resistance, and storage resistance.
1. Usage:
Model: XC930 Aluminium Pigment (Liquid Pasty) |
Particle size: 6um |
Solid content: 30% |
High brightness level |
Model: XC940 Aluminium Pigment (Liquid Pasty) |
Particle size: 6um |
Solid content: 40% |
High brightness level |
This product is acid and alkali resistant, corrosion resistant, and surface coated. |
|||
Recommended addition ratio: 1. add 12 kg of XC930 aluminum silver paste to achieve full coverage. 2. XC940 aluminum silver paste, add 12 kg to achieve full coverage. The dosage can be adjusted according to the desired effect and the weight of the balloon.
|
|||
Usage:
|
2. Storage of aluminum pigment before use
1. Water-based aluminum pigment should be stored in a place with room temperature to avoid cold and prevent the dispersion function from being reduced.
2. After opening the package, the aluminum pigment should be used up as soon as possible. The unused aluminum pigment should be covered with a lid in time to avoid accidentally entering other raw materials, especially acid-base additives to form a chemical reaction, which will affect the reuse.
3. For aluminum pigments that have been stored for a long time, they must be fully stirred before being used again to confirm whether the quality of the aluminum pigment has changed. After the experiment, it is determined whether to continue to use it.
3. Post-use treatment of aluminum pigments
1. The products mixed with aluminum pigment latex must be used up as soon as possible, because the latex contains a variety of alkaline corrosive additives, which will damage the aluminum pigment coating. If the coating is damaged, a reaction will definitely occur.
2. For the aluminum pigment latex mixture remaining in the trough, if metal balls are not produced in a short time, it must be unloaded and placed in a container, and at least double the amount of water is added to dilute it. When it is used next time, it can be used after inspection without any problems.
the professional team to service !